All Issue

2022 Vol.10, Issue 3 Preview Page
Screen Printing Method on Crystalline Silicon Solar Cells : A Review

결정질 실리콘 태양전지에 적용될 스크린 프린팅 기술 개발 동향 : 리뷰

Young Woo Jeon1
,
Min Kyu Jang1
,
Min Je Kim1
,
Jun Sin Yi2
,
Jinjoo Park1*
전 영우1
,
장 민규1
,
김 민제1
,
이 준신2
,
박 진주1*
1Department of Energy Convergence, Cheongju University, Cheongju, 28497, Korea
2College of Information and Communication Engineering, Sungkyunkwan University, Suwon, 16419, Korea
1에너지융합학과, 청주대학교, 청주, 27739
2정보통신공학부, 성균관대학교, 수원, 16419
*Corresponding Author
30 September 2022. pp. 90-94
PDF XML Citation
Abstract

The screen-printing method is the most mature solar cell fabrication technology, which has the advantage of being faster and simpler process than other printing technology. A front metallization printed through screen printing influences the efficiency and manufacturing cost of solar cell. Recent technology development of crystalline silicon solar cell is proceeding to reduce the manufacturing cost while improving the efficiency. Therefore, screen printing requires process development to reduce a line width of an electrode and decrease shading area. In this paper, we will discuss the development trend and prospects of screen-printing metallization using metal paste, which is currently used in manufacturing commercial crystalline silicon solar cells.

Keywords
Metallization
Series resistance
Screen-printing method
Shading loss
References
1
Danjela Kuscer, "Screen Printing," Encyclopedia of Materials: Technical Ceramics and Glasses, 1, 227-232 (2021). 10.1016/B978-0-12-803581-8.12082-X
2
ITRPV, International Technology Roadmap for Photovoltaic (ITRPV): Results 2021, (twelfth ed.), 13-24 (2021).
3
Chen Daming et al., "24.58% total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design," Solar Energy Materials and Solar Cells, 206, 110258 (2020). 10.1016/j.solmat.2019.110258
4
W. Deng et al., "22.61 % Efficient Fully Screen Printed PERC Solar Cell," 2017 IEEE 44th Photovoltaic Specialist Conference (PVSC), 2220-2226 (2017). 10.1109/PVSC.2017.8366416
5
조성빈, 김희수, 허주열, "결정질 실리콘 태양전지 전면전극 형성기술 개발 동향," 한국태양광발전학회지, 1(2), 15-27 (2015).
6
Wenzel Timo et al., "Progress with screen printed metallization of silicon solar cells - Towards 20 μm line width and 20 mg silver laydown for PERC front side contacts," Solar Energy Materials and Solar Cells, 244, 111804 (2022). 10.1016/j.solmat.2022.111804
7
Hilali, M. M., "Understanding and development of manufacturable screen -printed contacts on high sheet-resistance emitters for low -cost silicon solar cells," Available from ProQuest Dissertations & Theses Global. (304999350) (2005).
8
M. Aoki and I. Sumita, "Requirements of Screen masks for Fine-line Printing on Textured Surface," Poster presentation at 8th Workshop on Metallization and Interconnection for Crystalline Silicon Solar Cells (2019).
9
A. Mette, "Potential of both sides contacted solar cells," Presented on Crystal Clear Workshop on Metallization, 10 (2008).
10
M. Horteis, "Aerosol-printed silicon solar cell exceeding 20% efficiency," Presented on Crystal Clear Workshop on Metallization, 10 (2008).
11
D. Erath, "Advanced screen printing technique for high definition front side metallization of crystalline silicion solar cells," Presented on Crystal Clear Workshop on Metallization, 10 (2008).
12
M. Hofmann, D. Erath, B. Bitnar, L. Gautero, J. Nekarda, A. Grobe, D. Biro, J. Rentsch, R. Preu, "Industrial type Cz Silicon Cells with screen-printed fine line front contacts and passivated rear contacted by laser firing," Proc. Of the 23rd Photovoltaic Solar Energy Conference (EUPVSEC), 1-5 (2008).
13
F. Clement, "Die Metal Wrap Through Solarzelle: Entwicklung und Charakterisierung," Dissertation, Freiburg (2009).
14
T. Falcon, A. Hobby, "High accuracy, high aspect ratio metallization on silicon solar cells using a print on print process," Proc. Of the 25th Photovoltaic Solar Energy Conference (EUPVSEC), 1651-1655 (2010).
15
M. Galiazzo, V. Furin, D. Tonini, G. Cellere, A. Baccini, "Double printing of front contact Ag in c-Si solar cells," Proc. Of the 25th Photovoltaic Solar Energy Conference (EUPVSEC), 2338-2340 (2010).
16
P. Magnone, R. de Rose, M. Zanuccoli, D. Tonini, M. Galiazzo, G. Cellere, H.- W. Guo, M. Frei, E. Sangiorgi, C. Fiegna, "Understanding the impact of double screen-printing on silicon solar cells by 2-D numerical simulations," Conference Records of the 37th IEEE Photovoltaic Specialists Conference (PVSC), 2177-2180 (2011). 10.1109/PVSC.2011.6186388
17
H. Hannebauer, T. Falcon, R. Hesse, T. Dullweber, R. Brendel, "18,9%-efficient screen-printed solar cells applying a print-on-print process," Proc. Of the 26th Photovoltaic Solar Energy Conference (EUPVSEC), 1607-1610 (2011).
18
M. Pesce, M. Maugeri, M. Marsili, M. Zarcone, D. Tonini, C. Bottosso, M. Galiazzo, A. Tomasi, "Technological and economic assessment of two-steps printing processes in a mc-Si solar cells production environment," Energy Proc. 21, 24-31 (2012). 10.1016/j.egypro.2012.05.004
19
T. Dullweber, S. Gatz, H. Hannebauer, T. Falcon, R. Hesse, J. Schmidt, R. Brendel, "Towards 20% efficient large-area screen-printed rear-passivated silicon solar cells," Prog. Photovoltaics Res. Appl. 20, 630-638 (2012). 10.1002/pip.1198
20
A.F. Carroll, "Screen printed metal contacts to Si solar cells - formation and synergistic improvements," Conference Records of 39th IEEE Photovoltaic Specialists Conference (PVSC), 3435-3440 (2013). 10.1109/PVSC.2013.6745186
21
H. Hannebauer, T. Dullweber, T. Falcon, X. Chen, R. Brendel, "Record low Ag paste consumption of 67.7 mg with dual print," Energy Proc. 43, 66-71 (2013). 10.1016/j.egypro.2013.11.089
22
Y.-H. Chang, W.-M. Su, P.-S. Huang, L.-W. Cheng, "Improvement of the solar cell efficiency by fine line print on print technology," Conference Records of 39th IEEE Photovoltaic Specialists Conference (PVSC), 2176-2178 (2013). 10.1109/PVSC.2013.674490623714323
23
H. Hannebauer, T. Dullweber, U. Baumann, T. Falcon, R. Brendel, "21.2%-efficient fineline-printed PERC solar cell with 5 busbar front grid," Phys. Status Solidi Rapid Res. Lett., 675-679 (2014). 10.1002/pssr.201409190
24
M. Galiazzo, A. Voltan, E. Bortoletto, M. Zamuner, M. Martire, O. Borsato, M. Bertazzo, D. Tonini, "Fine line double printing and advanced process control for cell manufacturing," Energy Proc. 67, 116-125 (2015). 10.1016/j.egypro.2015.03.295
25
A. Voltan, M. Galiazzo, F. Oberholtzer, M. Emsley, C.E. Dube, J.G. Graff, "Cell efficiency improvement of fully implanted nPERT solar cells realized through metallization optimization," Proc. of the 31st Photovoltaic Solar Energy Conference (EUPVSEC), 779-782 (2015).
26
M. Galiazzo, O. Borsato, E. Bortoletto, "Fine line double printing for today and tomorrow cell metallization and interconnection," Proc. Of the 32nd Photovoltaic Solar Energy Conference (EUPVSEC), 958-960 (2016).
27
M. Galiazzo, "Status and Perspectives of Metallization Technologies for HVM," Presented on 7th Metallization Workshop, 22-23 (2017).
28
S. Werner, E. Lohmüller, P. Saint-Cast, J. Greulich, J. Weber, S. Schmidt, A. Moldovan, A. Brand, T. Dannenberg, S. Mack, S. Wasmer, M. Demant, M. Linse, R. Ackermann, A. Wolf, R. Preu, "Key aspects for fabrication of p-type Cz-Si PERC solar cells exceeding 22% conversion efficiency," Proc. Of the 33rd Photovoltaic Solar Energy Conference (EUPVSEC), 25-29 (2017).
29
A. Lorenz, M. Linse, H. Frintrup, M. Jeitler, A. Mette, M. Lehner, R. Greutmann, H. Brocker, M. Konig, D. Erath, F. Clement, "Screen printed thick film metallization of silicon solar cells - recent developments and future perspectives," Proc. Of the 35th Photovoltaic Solar Energy Conference (EUPVSEC), 819-824 (2018).
30
F. Clement, M. Linse, S. Tepner, N. Wengenmeyr, L. Ney, K. Krieg, A. Lorenz, M. Pospischil, S. Bechmann, K. Oehrle, S. Steckemetz, R. Preu, "Project FINALE - screen and screen printing process development for ultra-fine-line contacts below 20 μm finger width," Proc. Of the 36th Photovoltaic Solar Energy Conference (EUPVSEC), 9-13 (2019).
31
S. Tepner, N. Wengenmeyr, L. Ney, M. Linse, M. Pospischil, F. Clement, "Improving wall slip behavior of silver pastes on screen emulsions for fine line screen printing," Sol. Energy Mater. Sol. Cells, 109969 (2019). 10.1016/j.solmat.2019.109969
32
E. Lohmüller, J. Greulich, P. Saint-Cast, S. Lohmmüller, S. Schmidt, U. Belledin, T. Fellmeth, S. Mack, G. Emanuel, K. Krieg, M. Zimmer, R. Kunert, F. Zobel, M. Linse, J. Horzel, M. Meßmer, A. Wolf, R. Preu, "Front side optimization on boron- and gallium-doped Cz-Si PERC solar cells exceeding 22% conversion efficiency," Proc. Of the 37th European Photovoltaic Conference (EUPVSEC), 7-11 (2020).
33
S. Tepner, L. Ney, M. Linse, A. Lorenz, M. Pospischil, F. Clement, "Studying knotless screen patterns for fine line screen printing of Si solar cells," IEEE Journal of Photovoltaics, 10, 319-325 (2020). 10.1109/JPHOTOV.2019.2959939
34
S. Tepner, L. Ney, M. Linse, A. Lorenz, M. Pospischil, K. Masuri, F. Clement, "Screen pattern simulation for an improved front-side Ag-electrode metallization of Si-solar cells," Prog. Photovoltaics Res. Appl., 1054-1062 (2020). 10.1002/pip.3313
35
B. B. van Aken, S. Ramesh, K. J. J. Tool, J. Loffler, A. Weeber and G. J. M. Janssen, "Optimizing front and rear metallization grids for bifacial annual yield," Poster presentation at 8th Workshop on Metallization and Interconnection for Crystalline Silicon Solar Cells (2019).
36
M. Galiazzo, "Enabling 7,500 wph Productivity by a Novel Screen Printing Process," Presentation at 8th Workshop on Metallization and Interconnection for Crystalline Silicon Solar Cells (2019).
37
D. Ourinson, G. Emanuel, A. Csordás, G. Dammaß, H. Müller, C. Sternkiker, F. Clement and S. W. Glunz, "In-situ wafer temperature measurement during firing process via inline infrared thermography," Presentation at 8th Workshop on Metallization and Interconnection for Crystalline Silicon Solar Cells (2019). 10.1063/1.5125878
38
G. Emanuel, D. Ourinson, G. Dammaß, H. Müller, C. Sternkiker, F. Ogiewa, K. Rahmanpour, T. Javaid, A. Csordás, S. Nold, S. W. Glunz and Clement, F., "Project "FEUERDRACHE": Process Development and Control of Contact Firing Processes for High-Efficiency Silicon Solar Cells," Presentation at 9th Workshop on Metallization and Interconnection for Crystalline Silicon Solar Cells (2020). 10.1063/5.0056036
39
G. Emanuel, D. Ourinson, G. Dammaß, H. Müller, C. Sternkiker, F. Ogiewa, K. Rahmanpour, T. Javaid, A. Csordás, S. Nold, S. W. Glunz and F. Clement, "Project "FEUERDRACHE": Process Development and Control of Contact Firing Processes for High-Efficiency Silicon Solar Cells," These proceedings (2021). 10.1063/5.0056036
40
E. Krassowski, S. Großer, Turek, Marko, Henning, Andreas and H. Zhao, "Investigation of monocrystalline p-type PERC cells featuring the Laser Enhanced Contact Optimization process and new LECO paste," These proceedings (2021). 10.1063/5.0056380
41
E. Krassowski, B. Jaeckel, U. Zeller, M. Pander, P. Schenk, Eckehard Hofmueller, "Reliability Evaluation of Photovoltaic Modules Fabricated from Treated Solar Cells by Laser-Enhanced Contact Optimization Process," Special Issue : EUPVSEC, 6, 2100537 (2022). 10.1002/solr.202100537
42
Yang Yi, Seyedmohammadi Shahram, Kumar Umesh, Gnizak Dave, Graddy E.d. and Shaikh Aziz, "Screen Printable Silver Paste For Silicon Solar Cells With High Sheet Resistance Emitters," Energy Procedia, 8, 607-613 (2011). 10.1016/j.egypro.2011.06.190
43
K. Abdel Aal and N. Willenbacher, "Highspeed Video Analysis of The Paste Transfer Process During Screen Printing," Presentation at 9th Workshop on Metallization and Interconnection for Crystalline Silicon Solar Cells (2020).
44
J. J. Diaz Leon, C. Allebé, A. Ingenito, F.-J. Haug , M. Despeisse, C. Ballif and S. Nicolay, Lean "Integration of p- and n-type passivating contacts by PECVD and PVD," Presentation at 9th Workshop on Metallization and Interconnection for Crystalline Silicon Solar Cells (2020).
45
A. Chaudhary, J. Hoß, Jan Lossen, René van Swaaij and M. Zeman, "Advancement in screen printed fire through silver paste metallisation of polysilicon based passivating contacts," Presentation at 9th Workshop on Metallization and Interconnection for Crystalline Silicon Solar Cells (2020). 10.1063/5.0055978
46
D. Erath, S. Pingel, R. Khotimah, A. De Rose, D. Eberlein, T. Wenzel, A. Lorenz and F. Clement, "Fast screen printing and curing process for silicon heterojunction solar cells," Presentation at 9th Workshop on Metallization and Interconnection for Crystalline Silicon Solar Cells (2020). 10.1063/5.0056429
Information
  • Publisher :Korea Photovoltaic Society
  • Publisher(Ko) :한국태양광발전학회
  • Journal Title :Current Photovoltaic Research
  • Volume : 10
  • No :3
  • Pages :90-94
  • Received Date : 2022-09-08
  • Revised Date : 2022-09-20
  • Accepted Date : 2022-09-20
  • DOI :https://doi.org/10.21218/CPR.2022.10.3.090
Journal Informaiton Current Photovoltaic Research Current Photovoltaic Research
Online Submission
  • NRF
  • KISTI Current Status
  • KISTI Cited-by
  • crosscheck
  • orcid
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close